The DS3644 is a secure supervis
or with 1024 by
tes of S
RAM for the secure storage of sensi
tive data and the physical tamper-sensing response functions required in cryptographic processors and data security equipment.
One of the DS3644's primary features is the on-chip nonimprinting memory, consisting of eight 128-byte banks incorporating a high-speed, direct-wired clearing function. The 1KB memory is constantly complemented in the b
ackground to prevent memory imprinting of data. The DS3644 architecture allows the user to clear selective banks of the memory based upon specified tamper events. In the event of a qualified tamper event, the desired bank(s) of memory are ra
pidly cleared and a negative bias
can be applied to erase external memory.
The DS3644 includes a seconds counter, watchdog timer,
CPU supervisor, nonvolatile (NV) SRAM controller, and on-chip temperature sensor. In the event of a primary power failure, an external battery source is automat
ically switched in to keep the memory, time, and tamper-detection circuitry active. The DS3644 provides low-leakage, tamper-detection inputs for interface to external sensors, interlocks, and antitamper meshes. The DS3644 also invokes a tamper event on absolute temperature, if the temperature rate-of-change exceeds programmed limits, or if the crystal oscillator frequency falls outside a specified window. The tamper event is latched and timestamped for fault-recovery purposes.
Access to the timer, tamper monitoring, memory, and device configuration is conducted through an I²C-compatible interface. The DS3644 is assembled in a Pb-free, 7mm x 7mm x 0.8mm CSBGA package.
Memory
- 1024-Byte Nonimprinting Memory with High-Speed Erase
- 64 Bytes General-Purpose RAM (Not Cleared)
- External SRAM Control and Optional Tamper-Event Erasure
- Segmented Tamper-Detection Memory Hierarchy with Programmable Tamper-Event Sources
Tamper
- On-Chip Programmable Temperature Sensing with Proprietary Rate-of-Change (ROC) Detector
- Two General-Purpose Tamper-Detect Logic Inputs
- Four Uncommitted Tamper-Detect Comparator Inputs
- Four Window Comparators with On-Chip Reference Voltage
- Latching and Timestamping of Tamper Events
- Crystal Oscillator Tamper Monitoring
Other
- Programmable Power-Consumption Options for Very Low Standby Current
- 64-Bit Unique Silicon Serial Number
- On-Chip Random-Number Generator (RNG)
- Designed to Meet NIST FIPS 140-2 Requirements
- 32-Bit Seconds Counter with Watchdog Timer and Alarm Output
- CPU Supervisor
- I²C-Compatible Interface
应用/使用
接入控制安全系统
ATM
加密处理器
电子商务服务器
游戏机
网络路由器和交换机
网络存储服务器
密码键盘
销售终端机(POS)
安全通信
机顶盒
智能读卡器
软件定义的无线装置